Celotex Insulation

bmd logo        
  Celotex Kingspan 12no.  2400x1200x100mm only £371.88 + VAT  
Celotex Kingspan 20no. 2400x1200x25mm only £219.80 + VAT
contact bmd insulation on 01793 791010
rigid insulation boards
fibreglass insulation
rockwool insulation
triso super 10
thinsulex
plasterboard
other products
special offers
home page
technical library
need a quote
technical library
bmd news
contact us
faq
contact us
BMD Insulation can supply the whole range of Celotex insulation currently available from Celotex Insulation Direct. Below is a list of Celotex Insulation rigid board materials which are available from stock in any quantity or to order (sometimes in pack quantities).
 
celotex insulation
   

Celotex Insulation TB3000 / Celotex TB4000 ( Thermal Break board )

Celotex TB3000 / TB4000 Insulation board is a multi-purpose board designed where therrmal bridges need eliminating in Pitched roofs, flat roofs, floors, timber and steel framed buildings and solid masonry walls Celotex TB4000 is available in 2400x1200 sheets from 12mm-45mm deep, 12mm makes Celotex the thinnest PIR board on the market at this time.

Celotex Insulation GA3000 / Celotex GA4000 ( General application board )

Celotex GA3000 / GA4000 Insulation board is a multi-purpose board manufactured from polyisocyanurate ( PIR ) covered in low emissivity foil facings on both sides it is designed for use where pitched roof insulation , flat roof insulation , floor insulation , timber frame insulation , steel framed building insulation and solid masonry wall insulation are required and is available in 2400x12200 from 50mm -100mm.

Celotex Insulation XR3000 / Celotex XR4000 ( Extra thick board )

Celotex XR3000 / XR4000 Insulation board is mainly used in 'cut to fit' applications such as between floor joists or in roof rafters although it is also suitable for use for floor insulation and wall insulation. This Insulation board meets the current and future requirements of ( part L) of building regs. and the code for sustainable homes and is available in 2400x1200 from 110mm-200mm.

Celotex Insulation CW3000 / Celotex CW4000 ( Cavity wall insulation )

Celotex CW3000 / CW4000 is an Insulation board made specifically for partial fill cavity wall insulation and is easily fixed in position with the appropriate wallties and clips. This Celotex Insulation board is manufactured in thicknesses from 25mm-100mm and is made from zero ozone depletion blowing agents reinforced with glass fibre and covered both sides in low emissivity foil facings.

Also available from BMD Insulation are the Celotex FF4000 , Celotex TD4000 , Celotex TA4000 and Celotex EL3000 ranges of boards along with the brand new range of Celotex FR4000 fire resistant insulation boards and the Celotex Insulation PL4000 range of plasterboard thermal laminated boards.
contact bmd insulation on 01793 791010
Rigid insulation boards  Fibreglass insulation   Rockwool Insulation   Tri-Iso 10  Thinsulex  Plasterboard   Other products   Special offers  
Home page
 Technical Library BMD News  Contact   About us FAQ   Terms And Conditions   Privacy Policy
  Kingspan Insulation   Rockwool Insulation   Thermaline Insulation  Celotex Insulation
click here